Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 61
Table 3-2, Top View of System Board, Verify that the interlock LEDs are normal. See Appendix D, LED
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3-8 Compaq ProLiant 6400R Setup and Installation Guide Table 3-2 Top View of System Board continued Item Description Processor Power Module 3 Processor 4 Processor Power Module 4 CAUTION: Each processor must have an associated PPM installed. IMPORTANT: If two processors are used with different speeds, install the faster one in slot 1 and install the slower one in slot 3. Set SW2 and SW3 accordingly. 14. Install the processor: a. Pushing the processor into the slot until it is firmly until seated . b. Secure the processor by rotating the ejector levers inward . c. When the ejectors are seated, complete the installation by tightening the retention screw finger-tight. 3 2 2 1 Figure 3-7. Installing the processor 15. Reconnect the power cords to the server. 16. Verify that the interlock LEDs are normal. See Appendix D, "LED Indicators." 17. Replace the top access panel.