Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 40
Attaching the Bracket Rail to the Rack Mounting Bracket
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2-12 Compaq ProLiant 6400R Setup and Installation Guide Each slide rail assembly consists of an outer bracket rail and an inner server rail. The pieces can be separated. The bracket rails attach to the rack mounting brackets, and the server rails attach to the sides of the server chassis. Figure 2-3. Slide rail assembly (outer bracket rail and inner server rail) IMPORTANT: To make the installation of the rack mounting bracket easier, attach the bracket rail to the rack mounting bracket before attaching the mounting bracket assembly to the rack. In this way, the joined rack mounting bracket and bracket rail can be fastened to the rack as one assembly. Attaching the Bracket Rail to the Rack Mounting Bracket NOTE: Read all six steps before you begin. 1. Unpack the hardware mounting kit. Lay the two-piece slide rail assembly (outer bracket rail and inner server rail) and fasteners on a flat surface with the mounting brackets and fasteners that came with the rack. 2. Lay the bracket rail inside of the rack mounting bracket with the front of both pieces oriented in the same direction. Align the front screw hole in the rack mounting bracket and the bracket rail. To identify the front of the rack mounting bracket and the bracket rail, see that the front of the rack mounting bracket has alignment tabs on its flange and the front of the bracket rail enables the inner slide to move forward on ball bearings.