Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 45
the front rail of the rack using one M6 by 12-mm Phillips screw in the, Using the pencil marks
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Rack-Mountable Server Installation 2-17 CZR4-012.eps Figure 2-7. Back of mounting bracket assembly installed 4. Using the pencil marks, attach the rack mounting bracket assembly to the front rail of the rack using one M6 by 12-mm Phillips screw in the bottom hole of the bracket. Do not use washers. IMPORTANT: Place one screw in the bottom hole of the bracket. NOTE: The tabs on the front of the rack mounting bracket help to align it with the front of the frame. Figure 2-8. Attaching rack mounting bracket assembly to the front of the rack 5. After attaching both of the mounting bracket assemblies to the rack, prepare the server for mounting.
Rack-Mountable Server Installation
2-17
CZR4-012.eps
Figure 2-7.
Back of mounting bracket assembly installed
4.
Using the pencil marks, attach the rack mounting bracket assembly to
the front rail of the rack using one M6 by 12-mm Phillips screw in the
bottom hole of the bracket. Do not use washers.
IMPORTANT:
Place one screw in the bottom hole of the bracket.
NOTE:
The tabs on the front of the rack mounting bracket help to align it with the front of
the frame.
Figure 2-8.
Attaching rack mounting bracket assembly to the front of the rack
5.
After attaching both of the mounting bracket assemblies to the rack,
prepare the server for mounting.