Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 93

PCI Hot-Plug Application Support

Get Compaq ProLiant 6400R PDF manuals and user guides View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

PCI Hot Plug Technology 5-5 Table 5-1 PCI Hot Plug LEDs continued LED Power Status OK to Open Green Flashing No Amber On Green Off No Amber On Green Off Yes Amber Off Slot Status Power slot is being turned off or on which may take several minutes. A problem may exist with the slot, the PCI board, or the driver. Do not open the slot release lever until the green LED is off. Power to this slot is turned off but this slot requires attention. A problem may exist with the slot, board, or driver. 1. Open the slot release lever. The amber LED turns off. 2. Remove or replace the board. 3. Connect the cables to the PCI board. 4. Close the slot release lever. 5. Return power to the slot through the PCI Hot Plug application. The green LED turns on. The power to the slot is off. If you need to replace the card in this slot, follow these steps: 1 Open the slot release lever. 2. Remove or replace the board. 3. Connect the cables to the PCI board. 4. Close the slot release lever. 5. Return power to the slot through the PCI Hot Plug application. The green LED turns on. PCI Hot Plug Application Support In partnership with Microsoft and Novell, Compaq has developed software support implementations for each company's operating system. For SCO support, check the Compaq website: www.compaq.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
PCI Hot Plug Technology
5-5
Table 5-1
PCI Hot Plug LEDs
continued
LED
Power Status
OK to Open
Slot Status
Green
Amber
Flashing
On
No
Power slot is being turned off or on which may
take several minutes. A problem may exist
with the slot, the PCI board, or the driver. Do
not open the slot release lever until the green
LED is off.
Green
Amber
Off
On
No
Power to this slot is turned off but this slot
requires attention. A problem may exist with
the slot, board, or driver.
1.
Open the slot release lever. The amber
LED turns off.
2.
Remove or replace the board.
3.
Connect the cables to the PCI board.
4.
Close the slot release lever.
5.
Return power to the slot through the PCI
Hot Plug application. The green LED turns
on.
Green
Amber
Off
Off
Yes
The power to the slot is off. If you need to
replace the card in this slot, follow these steps:
1
Open the slot release lever.
2.
Remove or replace the board.
3.
Connect the cables to the PCI board.
4.
Close the slot release lever.
5.
Return power to the slot through the PCI
Hot Plug application. The green LED turns
on.
PCI Hot Plug Application Support
In partnership with Microsoft and Novell, Compaq has developed software
support implementations for each company’s operating system. For SCO
support, check the Compaq website:
www.compaq.com