Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 48
Attaching the Cable Management Arm Bracket and Cable Management Arm
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2-20 Compaq ProLiant 6400R Setup and Installation Guide 8. Secure the server face plate to the front of the rack by screwing the thumbscrews into the cage nuts. 9. Tighten the thumbscrews before you close the rack door to prevent the door from hitting protruding thumbscrews. Attaching the Cable Management Arm Bracket and Cable Management Arm Installing the Cable Management Arm Bracket The cable management arm bracket fastens to the rear of the rack server chassis. The bracket provides an attachment point for the cable management arm from the server to the rear frame of the rack. Attach the cable management arm bracket to the back of the server with two 6-32 × 0.312 Torx screws. Figure 2-11. Attaching a cable management arm bracket to the server Attaching the Cable Management Arm A double-hinged cable management arm and fasteners ship with each server. The cable management arm attaches to the server cable management arm bracket and to the rear frame of the rack. All cables to and from the server are tied to the arm. The two hinges enable the cable management arm with attached cables to swing out of the way when you need to access the rear of the server.