Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 70
Removing the Peripheral Board, Hot-Plug Areas
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Installing Hardware Options 3-17 Removing the Peripheral Board Remove the peripheral board by loosening the thumbscrews , rotating the release latches outward to 30 degrees , and pulling the board up out of the socket . CAUTION: Do not pull the release latches to a full 90 degrees because the levers will break. 2 1 2 1 3 Figure 3-15. Removing the peripheral board Hot-Plug Areas This section describes access to the following areas: PCI Hot Plug expansion boards. For operation information, see Chapter 5, "PCI Hot Plug Technology." Hot-plug SCSI drives Hot-plug power supplies Hot-plug fans Components in these areas have port-colored latches or levers to signify that they are hot-plug devices.
Installing Hardware Options
3-17
Removing the Peripheral Board
Remove the peripheral board by loosening the thumbscrews
, rotating the
release latches outward to 30 degrees
, and pulling the board up out of the
socket
.
CAUTION:
Do not pull the release latches to a full 90 degrees because the
levers will break.
3
2
2
1
1
Figure 3-15.
Removing the peripheral board
Hot-Plug Areas
This section describes access to the following areas:
■
PCI Hot Plug expansion boards. For operation information, see
Chapter 5,
“
PCI Hot Plug Technology.
”
■
Hot-plug SCSI drives
■
Hot-plug power supplies
■
Hot-plug fans
Components in these areas have port-colored latches or levers to signify that
they are hot-plug devices.