Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 95
Replacing an Adapter, Viewing Slot Detail Information
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
PCI Hot Plug Technology 5-7 Replacing an Adapter 1. Use the Remove command to remove the adapter from the slot. See "Removing an Adapter." 2. Replace the failed adapter by putting the new adapter in the slot and closing the slot release lever. 3. After the new adapter is detected, NCMCON asks if you want to configure and apply power to the slot. If you answer "Yes," power is applied to the slot, the green LED is lit, and the status of the slot on the console changes to Ready. If you answer "No," the console status does not change. 4. Press Enter to go to the Slot Options menu. 5. Use the arrow keys to select Replace Adapter, and press Enter. NCMCON processes the replace request. Removing an Adapter 1. From the Main menu, highlight the slot and adapter to be removed. 2. Press Enter to go to the Slot +Options menu. 3. Use the arrow keys to select Remove Adapter and press Enter. NCMCON then processes the remove request. After the slot has a status of Powered Off and the green LED is no longer lit, you can remove the adapter by opening the slot release lever and taking the adapter out of the slot. NCMCON updates the status of the slot. Viewing Slot Detail Information 1. From the Main menu, highlight the slot and adapter information to be viewed. Press Enter. 2. Select Slot Detail Information from the Slot Options menu.