Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 49
the bracket., mm Phillips screws. Align the arm
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Rack-Mountable Server Installation 2-21 1. For easier handling, slide the server into the rack. Next, attach the cable management arm to its bracket. If you attach the arm before loading the server in the rack, the arm may swing around and interfere with the loading. 2. Attach one end of the cable management arm to the cable management arm bracket using two M6 × 12-mm Phillips screws. Align the arm to the bracket. Figure 2-12. Attaching the cable management arm to the cable management arm bracket 3. Align the other end of the cable management arm on the outside of the rear frame rail of the rack. Align the cable management arm screwretaining plate on the inside of the rack frame rail. Attach the cable management arm screw-retaining plate and washer to the rack.