Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 130
Hot-Plug SCSI Hard Drives, Hot-Plug Fan LED Indicators, Table D-7
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
D-8 Compaq ProLiant 6400R Setup and Installation Guide Hot-Plug SCSI Hard Drives IMPORTANT: Before adding or removing any hot-plug SCSI drives, be sure to set the drive in the Standby mode, as directed by the operating system instructions. When replacing hot-plug hard drives, these guidelines must be followed: LED Green Amber Green Flashing Table D-7 Hot-Plug SCSI Hard Drive LEDs Power Status On Off On Description Never remove a hot-plug drive if the LED is green. After an online spare has been completely rebuilt, the online LED displays solid green. Replace a hot-plug hard drive when the drive's LED is amber. Drives that have been marked as failed by the controller are indicated by the amber Drive Failure LED on the drive tray. A drive's online LED flashes green when it is being rebuilt. Never remove a drive while another drive is being rebuilt. A replaced drive is restored from data stored on the other drives. Hot-Plug Fan LED Indicators For an understanding of the front panel fan LED, refer to the section "Front Panel LED Indicators" earlier in this Appendix.