Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 17
Internal Drive Bays, Internal 1-Inch Wide Ultra2 SCSI Hot-Plug Drive Bays
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
1-4 Compaq ProLiant 6400R Setup and Installation Guide Internal Drive Bays Internal 1-Inch Wide Ultra2 SCSI Hot-Plug Drive Bays The Compaq ProLiant 6400R server supports one SCSI hard-drive cage that can be configured with up to four 1-inch standard hot-plug Wide Ultra2 SCSI hard drives. Drives can be of any storage capacity but must be mounted on Compaq hot-plug drive trays. Internal Removable Media Drive Bays Pre-installed high speed, low profile IDE CD-ROM drive Pre-installed 1.44-MB 3.5-inch diskette drive Power Supplies One hot-plug power supply (450 W at 220/110 V), standard Redundant hot-plug power supplies provide load balancing, an additional level of availability (optional) Hot-Plug Power Supply Advanced Features Auto Line Sensing capability. No switch is needed to select the appropriate line voltage. Power Down Manager These utilities are provided on the Compaq Support Software for Microsoft Windows NT 4.0 diskettes (NTSSD). For more detailed information, see the NTREADME.HLP file on Diskette 1. Future operating system support is planned for later release. System Power Supplies Management Guidelines Use the following guidelines when evaluating these tradeoffs. NOTE: The following guidelines are general. Use the Power Supply Viewer Utility and option documents to obtain the most accurate power capacity and assessment of power margin.