Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 109
Run Diagnostics to, or Test Fixture
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
3-12 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide Table 3-2 POST Error Messages continued Error Code Audible Beeps 219-Snoop Rules None SRAM Failure. System Halted. 220-Cache None Accelerator Slot x Initialization Failed. System Halted. 221-Power Fault On None Processor Bus X 301-Keyboard Error None 301-Keyboard Error None or Test Fixture Installed ZZ-301-Keyboard None Error 303-Keyboard None Controller Error 304-Keyboard or None System Unit Error Probable Source of Problem Catastrophic chipset failure occurred. Cache accelerator in slot x improperly installed or bad. A PPM on indicated bus is in a failed state. Keyboard failure occurred Keyboard failure occurred. Recommended Action Call Compaq authorized service provider. Check cache accelerator installation and if properly installed, replace. Run Compaq Diagnostics. Replace failed assembly as indicated. Turn off the computer, then reconnect the keyboard. Replace the keyboard. Keyboard failure occurred. (ZZ represents the Keyboard Scan Code.) System board, keyboard, or mouse controller failure occurred Keyboard, keyboard cable, or system board failure 1. A key is stuck. Try to free it. 2. Replace the keyboard. 1. Run Diagnostics. 2. Replace failed assembly as indicated. 1. Make sure the keyboard is attached. 2. Run Diagnostics to determine which is in error. 3. Replace the part indicated. continued