Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 72
Lower Processor Support Structure, in
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Removal and Replacement Procedures 2-55 Lower Processor Support Structure To remove the lower processor support structure: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the right side access panel. See "Right Side Access Panel" earlier in this chapter. 3. Remove the front and rear air baffles. See "Front Air Baffle" and "Rear Air Baffle" earlier in this chapter. 4. Remove the main processor air baffle. See "Main Processor Air Baffle" earlier in this chapter. 5. Remove all processors, Processor Power Modules, and terminator boards. See "
Removal and Replacement Procedures
2-55
Lower Processor Support Structure
To remove the lower processor support structure:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the right side access panel. See
“
Right Side Access Panel
”
earlier in this chapter.
3.
Remove the front and rear air baffles. See
“
Front Air Baffle
”
and
“
Rear Air Baffle
”
earlier
in this chapter.
4.
Remove the main processor air baffle. See
“
Main Processor Air Baffle
”
earlier in
this chapter.
5.
Remove all processors, Processor Power Modules, and terminator boards. See
“