Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 115
Failure in Bay X, Power Supply Fan
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
3-18 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide Table 3-2 POST Error Messages continued Error Code Audible Beeps 1613-Low System None Battery 1615-Power Supply None configuration error 1615-Power Supply Failure, Power Supply Unplugged, or Power Supply Fan Failure in Bay X 1617-Fan controller not responding. System halted. 1617-I/O Fan controller not responding. System halted 1617-CPU Fan controller not responding. System halted 1618-PCI slots powered down. Check PCI hot plug enabler connectors. 1620-Locked SCSI Bus Detected. Verify SCSI bus cabling. System halted. 1621-Current SCSI bus cable configuration is not recommended None 2 short 2 short 2 short None None None Probable Source of Problem Real time clock system battery is running low on power. Your configuration requires an additional power supply. A moving bar will display, to indicate that the system is waiting for another power supply to be installed. A power supply has failed. Fan controller failure detected. Recommended Action Replace battery (or add external battery) as soon as possible. Install the additional power supply. Reseat power supply firmly. -OrReplace power supply as soon as possible. Check and replace failed controller assembly. I/O fan controller failure detected. Check and replace failed controller assembly. CPU fan controller failure detected. Check and replace failed controller assembly. PCI hot plug enabler is missing or Check and replace missing or failed. failed assembly. SCSI bus failure detected. Improper SCSI bus cabling detected. Ensure that the integrated SCSI controller has SCSI termination attached. Check documentation for proper SCSI bus cabling. continued