Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 80
I/O Expansion Slots and Related Components
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Removal and Replacement Procedures 2-63 I/O Expansion Slots and Related Components The I/O expansion slots are located on the I/O board directly beneath the top access panel and are accessed using the PCI Hot Plug access doors. To access the I/O expansion slots: 1. Insert the access key into the PCI Hot Plug access door and turn it counter-clockwise . NOTE: Compaq recommends leaving the PCI Hot Plug access doors locked during normal use. 1 Figure 2-54. Unlocking the PCI Hot Plug access doors WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them.
Removal and Replacement Procedures
2-63
I/O Expansion Slots and Related Components
The I/O expansion slots are located on the I/O board directly beneath the top access panel and
are accessed using the PCI Hot Plug access doors.
To access the I/O expansion slots:
1.
Insert the access key into the PCI Hot Plug access door and turn it counter-clockwise
.
NOTE:
Compaq recommends leaving the PCI Hot Plug access doors locked during normal use.
1
Figure 2-54.
Unlocking the PCI Hot Plug access doors
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.