Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 56
Preparation Procedures
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Removal and Replacement Procedures 2-39 To remove the memory expansion board: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the right side access panel. See "Right Side Access Panel" earlier in this chapter. 3. Remove the memory expansion board retention bracket by loosening the thumbscrew , swinging the left side of the bracket out of the slot , and then pulling the bracket to the left and out the side of the unit . 3 2 1 Figure 2-33. Removing the memory expansion board retention bracket
Removal and Replacement Procedures
2-39
To remove the memory expansion board:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the right side access panel. See
“
Right Side Access Panel
”
earlier in this chapter.
3.
Remove the memory expansion board retention bracket by loosening the thumbscrew
,
swinging the left side of the bracket out of the slot
, and then pulling the bracket to the
left and out the side of the unit
.
2
3
1
Figure 2-33.
Removing the memory expansion board retention bracket