Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 49
Hot-Plug Front Processor Fan Assembly, Then lift the assembly away from the front of the server.
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2-32 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide Hot-Plug Front Processor Fan Assembly To remove the hot-plug front processor fan assembly: 1. Pull the lower fan ejector lever out to release the hot-plug front processor fan assembly. 2. Rotate the fan assembly up . Then lift the assembly away from the front of the server. 2 1 Figure 2-27. Removing the hot-plug front processor fan assembly Reverse steps 1 and 2 to replace the hot-plug front processor fan assembly.
2-32
Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide
Hot-Plug Front Processor Fan Assembly
To remove the hot-plug front processor fan assembly:
1.
Pull the lower fan ejector lever out
to release the hot-plug front processor fan assembly.
2.
Rotate the fan assembly up
. Then lift the assembly away from the front of the server.
2
1
Figure 2-27.
Removing the hot-plug front processor fan assembly
Reverse steps 1 and 2 to replace the hot-plug front processor fan assembly.