Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 74
Upper Processor Support Structure
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removal and Replacement Procedures 2-57 Upper Processor Support Structure To remove the upper processor support structure: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the lower processor support structure. See "Lower Processor Support Structure" earlier in this chapter. 3. Remove the five T-15 screws located along the top of the upper processor support structure. 4. Pull out the upper processor support structure. Figure 2-48. Removing the upper processor support structure Reverse steps 1 through 4 to replace the upper processor support structure.
Removal and Replacement Procedures
2-57
Upper Processor Support Structure
To remove the upper processor support structure:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the lower processor support structure. See
“
Lower Processor Support Structure
”
earlier in this chapter.
3.
Remove the five T-15 screws located along the top of the upper processor support
structure.
4.
Pull out the upper processor support structure.
Figure 2-48.
Removing the upper processor support structure
Reverse steps 1 through 4 to replace the upper processor support structure.