Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 32

Removal and Replacement Procedures 2-15 Mass Storage and Removable Media Devices Mass storage in Compaq ProLiant 8000 servers is divided between three hot-plug hard drive cages and a removable media area. Mass storage and removable media devices include the following: Up to seven 1-inch form factor Ultra2 hard drives (SCSI IDs 0 to 5, and 8) per drive cage One slim-line combination CD-ROM/1.44-MB diskette drive Two additional media bays Figure 2-10 and Table 2-1 show the standard shipping configuration of the removable media area and possible configurations for the hot-plug and Ultra2 SCSI drive cages in Compaq ProLiant 8000 servers. CAUTION: Removable media blank bezels and hot-plug drive cage blanking panels must be installed over unused mass storage and removable media device bays to maintain proper air flow. Cage #3 0 1 2 3 4 5 8 Cage #2 0 1 2 3 4 5 8 2 1 Cage #1 0 1 2 3 4 5 8 0 Figure 2-10. Mass storage and removable media areas Table 2-1 Mass Storage and Removable Media Area Configurations Location Hot-plug drive cage #3 Hot-plug drive cage #2 Hot-plug drive cage #1 Removable media bay Removable media bay Removable media bay Drive Positions (SCSI Identification) 0-5 and 8 0-5 and 8 0-5 and 8 2 2 0-1 Configuration Example of 1-inch hot-plug hard drives Example of 1-inch hot-plug hard drives Example of 1-inch hot-plug hard drives Non-hot-plug, integrated, 1.44 MB, 3.5-inch diskette drive Non-hot-plug 24X Max IDE slimline CD-ROM drive Non-hot-plug mass storage devices