Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 214

4 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide controller firmware upgrade caution 3-44 controllers communication failure 3-47 Smart Array cache 5-9 data transfer method 5-9 dimensions 5-9 logical drives supported 5-9 maximum drives supported 5-9 protocol 5-9 SCSI port connectors 5-9 specifications 5-9 upgrading firmware 3-47 Correctable Memory Logs See IML country kit, part number 1-7 Critical Error Log See also IML error messages 3-80 recorded information 3-74, 3-76, 3-78, 3-80 viewing 3-72, 3-80 where stored 3-80 Critical Error Log messages See also error log messages critical fan failure detected 3-8 D DAAD accessing remotely 3-84 description 3-3 software location 2-1 data integrity cautions 2-38 data loss caution 2-20, 2-21, 2-25, 2-28, 2-67, 2-71, 3-5 default configuration boot messages 3-4 determining 3-4 Diagnose Drive Array utility, accessing 3-33 diagnosing problems, hard drives 2-19 Diagnostic tools table 3-2 Diagnostics accessing 3-2, 3-5 booting remotely 3-78 defined 3-33 description 3-2 diskette, creating 3-33 Drive Array 3-33 error codes 3-33 locating 3-2 overview 3-2 POST error messages 3-8 running 3-33 software location 2-1 test error codes CD-ROM drive 3-42 diskette drive 3-39 hard drive 3-41 keyboard 3-37 memory 3-35 modem 3-40 NIC 3-41 pointing device interface 3-43 processor 3-34 SCSI hard drive 3-41 SCSI tape drive 3-42 SCSI/IDE CD-ROM drive 3-42 serial port 3-40 tape drive 3-42 video display unit 3-38 Test Error Codes Tables, description 3-33 when to run 3-7 Diagnostics CD, booting from 3-4 dial-in status, setting 3-77 dial-out status, setting 3-77 dial-out string, setting 3-77 DIMM specifications table 5-4 DIMM upgrade combinations table 2-37 disconnecting all power warning 2-5 disconnecting power from the system warning 2-3 diskette drive access time 5-4 cylinders 5-4 disabling 3-85 height 5-4 identified 2-15 read/write heads 5-4 removing, illustrated 2-17 rotation speed 5-4 specifications 5-4 test error codes 3-39 transfer rate 5-4 diskette drive specifications table 5-4 diskette drive test error codes table 3-39 diskette ejector switch, identified 4-15 diskette media connector, identified 4-4