Compaq ProLiant 8000 ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maint - Page 68
To remove a Processor Power Module, earlier
View all Compaq ProLiant 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removal and Replacement Procedures 2-51 To remove a Processor Power Module: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the right side access panel. See "Right Side Access Panel" earlier in this chapter. 3. Remove the main processor air baffle. See "Main Processor Air Baffle" earlier in this chapter. 4. Remove the processor associated with the Processor Power Module being replaced. Refer to Figure 2-39 and the "
Removal and Replacement Procedures
2-51
To remove a Processor Power Module:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the right side access panel. See
“
Right Side Access Panel
”
earlier in this chapter.
3.
Remove the main processor air baffle. See
“
Main Processor Air Baffle
”
earlier in
this chapter.
4.
Remove the processor associated with the Processor Power Module being replaced. Refer
to Figure 2-39 and the
“