Dell OptiPlex 7000 Small Form Factor Service Manual - Page 19
Hard drive, Removing the 2.5-inch hard drive
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Steps 1. Slide the intrusion switch into the slot on the chassis. 2. Insert the connector from intrusion switch cable into the connector on the system board. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Hard drive Removing the 2.5-inch hard drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. Removing and installing components 19
Steps
1.
Slide the intrusion switch into the slot on the chassis.
2.
Insert the connector from intrusion switch cable into the connector on the system board.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Hard drive
Removing the 2.5-inch hard drive
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
front bezel
.
Removing and installing components
19