Dell OptiPlex 7000 Small Form Factor Service Manual - Page 74
Removing the system board
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
19. M.2 2230/2280 solid-state drive slot 20. Processor socket 21. I/O cable Removing the system board Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the 2.5-inch hard-drive. 5. Remove the 3.5-inch hard-drive. 6. Remove the disk-drive cage. 7. Remove the expansion card. 8. Remove the Optional I/O modules. 9. Remove the solid-state drive. 10. Remove the WLAN card. 11. Remove the heat-sink and fan assembly. 12. Remove the memory modules. 13. Remove the processor. About this task The following images indicate the location of the system board and provide a visual representation of the removal procedure. 74 Removing and installing components
19.
M.2 2230/2280 solid-state drive slot
20.
Processor socket
21.
I/O cable
Removing the system board
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
front bezel
.
4.
Remove the
2.5-inch hard-drive
.
5.
Remove the
3.5-inch hard-drive
.
6.
Remove the
disk-drive cage
.
7.
Remove the
expansion card
.
8.
Remove the
Optional I/O modules
.
9.
Remove the
solid-state drive
.
10.
Remove the
WLAN card
.
11.
Remove the
heat-sink and fan assembly
.
12.
Remove the
memory modules
.
13.
Remove the
processor
.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
74
Removing and installing components