Dell OptiPlex 7000 Small Form Factor Service Manual - Page 53
Installing the memory, To prevent damage to the memory module
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
NOTE: Note the slot and the orientation of the memory module in order to replace it in the correct slot. Installing the memory Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the memory and provide a visual representation of the installation procedure. Steps 1. Ensure that the securing clips are in an open position. 2. Align the notch on the memory module with the tab on the memory-module slot. 3. Press down on the memory module until the memory module snaps into position and the securing clip locks in place. CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module. NOTE: Repeat step 1 to step 3 when installing more than one memory module in your computer. Next steps 1. Install the disk-drive cage. 2. Install the 3.5-inch hard-drive. 3. Install the 2.5-inch hard-drive. 4. Install the side cover. 5. Follow the procedure in after working inside your computer. Removing and installing components 53