Dell OptiPlex 7000 Small Form Factor Service Manual - Page 66

Chassis fan, Removing the chassis fan

Get Dell OptiPlex 7000 Small Form Factor PDF manuals and user guides View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

About this task The following images indicate the location of the optional I/O module and provide a visual representation of the installation procedure. Steps 1. Using a screwdriver, remove the bracket covering the I/O module slot. NOTE: This step is only for systems that are being upgraded with the I/O module for the first time. 2. Connect the I/O-module cable to the connector on the system board. 3. Insert the optional I/O module into its slot on the chassis. 4. Install the two screws to secure the I/O module to the chassis. Next steps 1. Install the heat-sink and fan assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Chassis fan Removing the chassis fan Prerequisites 1. Follow the procedure in before working inside your computer. 66 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
About this task
The following images indicate the location of the optional I/O module and provide a visual representation of the installation
procedure.
Steps
1.
Using a screwdriver, remove the bracket covering the I/O module slot.
NOTE:
This step is only for systems that are being upgraded with the I/O module for the first time.
2.
Connect the I/O-module cable to the connector on the system board.
3.
Insert the optional I/O module into its slot on the chassis.
4.
Install the two screws to secure the I/O module to the chassis.
Next steps
1.
Install the
heat-sink and fan assembly
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Chassis fan
Removing the chassis fan
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
66
Removing and installing components