Dell OptiPlex 7000 Small Form Factor Service Manual - Page 26

Disk-drive cage, Removing the disk-drive cage

Get Dell OptiPlex 7000 Small Form Factor PDF manuals and user guides View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Steps 1. Align the mounting points on the carrier with the slots on the hard drive. 2. Snap the 3.5-inch hard-drive onto the hard-drive carrier. 3. Align the tabs on the hard-drive carrier with the slots on the chassis and snap the hard-drive carrier onto the disk-drive cage. NOTE: Use the arrows seen on the caddy as guides to identify the tabs on the tray. 4. Connect the hard-drive data and power cables to the connectors on the hard drive. Next steps 1. Install the front bezel. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Disk-drive cage Removing the disk-drive cage Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the 2.5-inch hard-drive. 5. Remove the 3.5-inch hard-drive. 26 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Steps
1.
Align the mounting points on the carrier with the slots on the hard drive.
2.
Snap the 3.5-inch hard-drive onto the hard-drive carrier.
3.
Align the tabs on the hard-drive carrier with the slots on the chassis and snap the hard-drive carrier onto the disk-drive
cage.
NOTE:
Use the arrows seen on the caddy as guides to identify the tabs on the tray.
4.
Connect the hard-drive data and power cables to the connectors on the hard drive.
Next steps
1.
Install the
front bezel
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Disk-drive cage
Removing the disk-drive cage
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
front bezel
.
4.
Remove the
2.5-inch hard-drive
.
5.
Remove the
3.5-inch hard-drive
.
26
Removing and installing components