Dell OptiPlex 7000 Small Form Factor Service Manual - Page 90
Storage, Table 18. Integrated Devices continued, Table 19. Storage
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Table 18. Integrated Devices (continued) Options Storage This section provides storage details and settings. Table 19. Storage Options SATA Operation SATA Operation Storage Interface Port Enablement SMART Reporting Enable SMART Reporting Drive Information Enable MediaCard 90 BIOS setup Description to clean or replace the dust filter based on the following time intervals: ● Disabled (selected by default) ● 15 days ● 30 days ● 60 days ● 90 days ● 120 days ● 150 days ● 180 days Description This section allows the user to select the operating mode of the integrated SATA hard drive controller. The following options are available: ● Disabled - SATA controllers are disabled. ● AHCI - SATA is configured in AHCI mode. ● RAID On - SATA is setup to support RAID (Intel Rapid Storage Technology). (Selected by default) This section allows the user to enable or disable the onboard drives on the computer. The following options is available (ON by default). ● SATA-0 ● SATA-1 ● SATA-3 ● M.2 PCIe SSD-0 ● M.2 PCIe SSD-1 This section contains a toggle switch that allows the user to enable or disable the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting Technology) option on the system (OFF by default). This section provides information about the connected and active drives on the computer. The following options are available: ● M.2 PCIe SSD-0 ○ Type ○ Device This section allows setting the media cards ON/OFF or enable/disable media card in read-only state. The following options are available: