Dell OptiPlex 7000 Small Form Factor Service Manual - Page 48
WLAN antennas (External), Removing the external WLAN antenna
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
About this task The following image indicates the location of the WLAN antenna and provides a visual representation of the installation procedure. Steps 1. Route the WLAN antenna cables through the routing guides on the chassis. 2. Place and align the screw holes on the WLAN antenna with the screw holes on the chassis 3. Replace the two (M2x3) screws to secure the WLAN antenna to the chassis. Next steps 1. Install the disk-drive cage. 2. Install the WLAN card. 3. Install the 3.5-inch hard-drive. 4. Install the 2.5-inch hard-drive. 5. Install the front bezel. 6. Install the side cover. 7. Follow the procedure in after working inside your computer. WLAN antennas (External) Removing the external WLAN antenna Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the 2.5-inch hard-drive. 48 Removing and installing components