Dell OptiPlex 7000 Small Form Factor Service Manual - Page 34
Installing the M.2 2230 PCIe solid-state drive, Prerequisites, About this task, Steps, Next steps
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing the M.2 2230 PCIe solid-state drive Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the M.2 2230 PCIe solid-state drive and provide a visual representation of the installation procedure. Steps 1. Align the notch on the 2230 solid-state drive with the tab on the M.2 card slot on the system board. 2. Slide the 2230 solid-state drive into the M.2 card slot on the system board. Replace the screw (M2x3) that secures the 2230 solid-state drive to the system board. Next steps 1. Install the hard-drive and optical-drive bracket. 2. Install the 3.5-inch hard-drive. 3. Install the 2.5-inch hard-drive. 4. Install the front bezel. 5. Install the side cover. 6. Follow the procedure in after working inside your computer. Removing the M.2 2280 PCIe solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 34 Removing and installing components