Dell OptiPlex 7000 Small Form Factor Service Manual - Page 46
Table 3. Antenna-cable color scheme, Steps, Connectors on the wireless card, Antenna-cable color
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Steps 1. Connect the antenna cables to the WLAN card. The following table provides the antenna-cable color scheme for the WLAN card of your computer. Table 3. Antenna-cable color scheme Connectors on the wireless card Main (white triangle) Auxiliary (black triangle) Antenna-cable color White Black 2. Slide and place the wireless-card bracket on the wireless card. 3. Align the notch on the wireless card with the tab on the wireless-card slot. 4. Slide the wireless card at an angle into the wireless-card slot. 5. Replace the screw (M2x3) that secures the wireless card to the system board. Next steps 1. Install the disk-drive cage. 2. Install the 3.5-inch hard-drive. 3. Install the 2.5-inch hard-drive. 4. Install the front bezel. 5. Install the side cover. 6. Follow the procedure in after working inside your computer. 46 Removing and installing components