Dell OptiPlex 7000 Small Form Factor Service Manual - Page 97
Keyboard, Virtualization, Table 26. System Management continued, Table 27. Keyboard
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Table 26. System Management (continued) Options Wake on LAN Wake on LAN Auto On Time Auto On Time SERR Messages First Power On Date Keyboard This section provides keyboard settings. Table 27. Keyboard Options Enable keyboard Error Detection Numlock LED Virtualization This section provides details on Virtualization settings. Description This field allows the user to select if and how the system should boot when connected to LAN. The options here are as follows: ● Disabled - The system will not boot with any special LAN signals (selected by default). ● LAN only - Allows the system to be powered on by a special LAN signal from a network computer. ● WLAN only - Allows the system to power on by special WLAN signals. ● LAN or WLAN - Allows the system to power on by special LAN or wireless LAN signals. ● LAN with PXE Boot - Allows the system to wake-up from S4 or S5 state and boot to PXE. This field allows the user to set defined days/time when the sytem can automatically power on. The options here are as follows: ● Disabled (selected by default) ● Everyday ● Weekdays ● Select Days This section allows the user to enable or disable(ON/OFF) the SERR message mechanism (ON by default). NOTE: Some graphics cards require SERR message mechanism to be disbaled. This option if enabled lets the user see the ownership date (disabled by default). Description This field contains a toggle switch(ON/OFF) to allow the keyboard-related errors to be reported when the system boots. This field contains a toggle switch(ON/OFF) to allow the user to decide if the Numlock LED should be on when the system boots. BIOS setup 97