Dell PowerEdge R510 Hardware Owner's Manual - Page 102
Installing a Hard Drive Into a Hard-Drive Bay
View all Dell PowerEdge R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Figure 3-13. Installing and Removing an Internal Hard Drive From the Internal Hard-Drive Bay 3 2 1 4 1 internal hard drive bay 3 screws (4) * 2 release latch 4 internal hard drive *Screws are supplied along with the hard drives ordered from Dell. Installing a Hard Drive Into a Hard-Drive Bay 1 Insert the hard drive into the internal hard-drive bay with the connector end of the drive at the back, until it is flush with the back of the hard-drive bay. See Figure 3-13. 2 Attach the four screws to secure the hard drive to the hard-drive bracket. 102 Installing System Components
102
Installing System Components
Figure 3-13.
Installing and Removing an Internal Hard Drive From the Internal
Hard-Drive Bay
*Screws are supplied along with the hard drives ordered from Dell.
Installing a Hard Drive Into a Hard-Drive Bay
1
Insert the hard drive into the internal hard-drive bay with the connector
end of the drive at the back, until it is flush with the back of the hard-drive
bay. See Figure 3-13.
2
Attach the four screws to secure the hard drive to the hard-drive bracket.
1
internal hard drive bay
2
release latch
3
screws (4)
*
4
internal hard drive
3
1
2
4