Dell PowerEdge R510 Hardware Owner's Manual - Page 39
BIOS Unable to, Reseat DIMM. - memory slots
View all Dell PowerEdge R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Code Text Causes Corrective Actions E2021 Incorrect Incorrect memory memory configuration. configuration. Review User Guide. Check screen for specific error messages. See "Troubleshooting System Memory" on page 177. E2022 General failure during POST. Check screen message. General failure after video. Check screen for specific error messages. E2023 BIOS Unable to The system BIOS could mirror memory. not enable memory Check DIMMs. mirroring because of a faulty memory module or an invalid memory configuration. See "Troubleshooting System Memory" on page 177. E2110 Multibit Error The memory module in on DIMM ##. slot "##" has had a Reseat DIMM. multi-bit error (MBE). See "Troubleshooting System Memory" on page 177. E2111 SBE log disabled on DIMM ##. Reseat DIMM. The system BIOS has disabled memory single-bit error (SBE) logging and does not log anymore SBEs until the system is rebooted. "##" represents the memory module implicated by the BIOS. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Troubleshooting System Memory" on page 177. E2112 Memory spared on DIMM ##. Power cycle AC. The system BIOS has Remove AC power to the spared the memory system for 10 seconds and because it has determined restart the system. the memory had too many If the problem persists, errors. "##" represents the see "Troubleshooting memory module System Memory" on implicated by the BIOS. page 177. About Your System 39