Dell PowerEdge R510 Hardware Owner's Manual - Page 185
See Installing an Expansion-Card Riser
View all Dell PowerEdge R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
3 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 4 Open the system. See "Opening the System" on page 87. 5 Ensure that each expansion card is firmly seated in its connector. See "Installing an Expansion Card" on page 124. 6 Ensure that each expansion-card riser is firmly seated in its connector. See "Installing an Expansion-Card Riser" on page 128. 7 Close the system. See "Closing the System" on page 89. 8 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. 9 If problem is not resolved, turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 10 Open the system. See "Opening the System" on page 87. 11 Remove all expansion cards installed in the system. See "Removing an Expansion Card" on page 126. 12 Close the system. See "Closing the System" on page 89. 13 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. 14 Run the appropriate online diagnostic test. See "Running the System Diagnostics" on page 189. If the tests fail, see "Getting Help" on page 199. 15 For each expansion card you removed in step 11, perform the following steps: a Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. b Open the system. See "Opening the System" on page 87. c Reinstall one of the expansion cards. d Close the system. See "Closing the System" on page 89. e Run the appropriate diagnostic test. If the tests fail, see "Getting Help" on page 199. Troubleshooting Your System 185