Dell PowerEdge R510 Hardware Owner's Manual - Page 49

Message Causes Corrective Actions Memory set to minimum frequency. The memory frequency may If not an intentional setting, be intentionally set lower for check any other system power conservation. messages for possible causes. The current memory Ensure that your memory configuration may support configuration supports the only the minimum frequency. higher frequency. See "General Memory Module Installation Guidelines" on page 115. Memory tests terminated by keystroke. POST memory test was terminated by pressing the spacebar. Information only. MEMTEST lane failure detected on x Invalid memory configuration. Mismatched memory modules are installed. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 115. Mirror mode disabled. For The memory configuration Reconfigure the memory does not match the setting in modules for Memory mirror mode, DIMMs must be BIOS. The BIOS setting has Mirroring mode. See been disabled. "System Memory" on installed in page 114. pairs. Pairs must be matched in size and geometry. About Your System 49