Dell PowerEdge R510 Hardware Owner's Manual - Page 94
Removing a Hard Drive From a Hard-Drive Carrier, the hard drive from the carrier. See - rails
View all Dell PowerEdge R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
4 With the lever on the hard drive carrier open, slide the hard drive into the drive bay until the carrier contacts the backplane. See Figure 3-8. 5 Close the handle to lock the drive in place. Removing a Hard Drive From a Hard-Drive Carrier Remove the screws from the slide rails on the hard-drive carrier and separate the hard drive from the carrier. See Figure 3-9. Figure 3-9. Installing a Hot-Swap Hard Drive Into a Drive Carrier 1 4 3 1 hard drive 3 drive carrier 2 2 SAS/SATA indicator 4 screws (4) 94 Installing System Components
94
Installing System Components
4
With the lever on the hard drive carrier open, slide the hard drive into
the drive bay until the carrier contacts the backplane. See
Figure 3-8.
5
Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-9.
Figure 3-9.
Installing a Hot-Swap Hard Drive Into a Drive Carrier
1
hard drive
2
SAS/SATA indicator
3
drive carrier
4
screws (4)
2
1
3
4