Dell PowerEdge R510 Hardware Owner's Manual - Page 125
Close the expansion-card latch. See Connect any cables to the expansion card.
View all Dell PowerEdge R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
6 Holding the card by its edges, position the card so that the card-edge connector aligns with the expansion-card connector on the expansion-card riser. 7 Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated. 8 Close the expansion-card latch. See Figure 3-20. Figure 3-20. Installing or Removing an Expansion Card 2 1 3 1 expansion-card riser 3 expansion card 2 expansion-card latch 9 Connect any cables to the expansion card. Installing System Components 125
Installing System Components
125
6
Holding the card by its edges, position the card so that the card-edge
connector aligns with the expansion-card connector on the expansion-card
riser.
7
Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
8
Close the expansion-card latch. See Figure 3-20.
Figure 3-20.
Installing or Removing an Expansion Card
9
Connect any cables to the expansion card.
1
expansion-card riser
2
expansion-card latch
3
expansion card
3
2
1