Dell PowerEdge R510 Hardware Owner's Manual - Page 197
Reconnect your system and peripherals to their electrical outlets, and turn
View all Dell PowerEdge R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
NOTE: If you assign a new system and/or setup password with the jumper plug still in the "disabled" position, the system disables the new password(s) the next time it boots. 6 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 7 Open the system. See "Opening the System" on page 87. 8 Move the password jumper back to the enabled position to restore the password function. See Table 6-1. 9 Close the system. See "Closing the System" on page 89. 10 Reconnect your system and peripherals to their electrical outlets, and turn on the system. 11 Assign a new system and/or setup password. To assign a new password using the System Setup program, see "System and Setup Password Features" on page 76. Jumpers and Connectors 197