Dell PowerEdge R510 Hardware Owner's Manual - Page 128
Installing an Expansion-Card Riser, posts on the system board. See
View all Dell PowerEdge R510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Figure 3-21. Installing or Removing an Expansion-Card Riser 3 2 4 1 5 6 1 integrated storage controller slot 3 expansion-card riser 5 riser guide posts (2) 2 riser guides (2) 4 expansion card slot 6 expansion-card riser slots (2) Installing an Expansion-Card Riser 1 To install an expansion-card riser, align the riser guides with the riser guide posts on the system board. See Figure 3-21. 2 Lower the expansion-card riser into place until the expansion-card riser connector is fully seated. 3 If applicable, reinstall the expansion card. See "Installing an Expansion Card" on page 124. 128 Installing System Components
128
Installing System Components
Figure 3-21.
Installing or Removing an Expansion-Card Riser
Installing an Expansion-Card Riser
1
To install an expansion-card riser, align the riser guides with the riser guide
posts on the system board. See Figure 3-21.
2
Lower the expansion-card riser into place until the expansion-card riser
connector is fully seated.
3
If applicable, reinstall the expansion card. See "Installing an Expansion
Card" on page 124.
1
integrated storage controller slot
2
riser guides (2)
3
expansion-card riser
4
expansion card slot
5
riser guide posts (2)
6
expansion-card riser slots (2)
6
1
2
3
5
4