Dell PowerStore 5000X EMC PowerStore Installation and Service Guide - Page 17
Installing the front bezel
View all Dell PowerStore 5000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Figure 8. Installing a drive The activity light flashes to indicate that the spin-up sequence has begun. Installing the front bezel Prerequisites CAUTION: If the protective plastic strip is present on the front of the bezel, it must be removed before placing the system into operation. Failure to remove the protective plastic strip will cause the system to overheat. About this task Refer to Figure 9. Installing the bezel on page 17 while performing the procedure that follows. Steps 1. If present, remove the protective plastic strip from the front of the bezel. 2. Align the bezel with the enclosure. 3. Gently push the bezel into place on the cabinet until it latches. 4. If the bezel has a key lock, lock the bezel with the provided key. Figure 9. Installing the bezel CL5262 Install a new base enclosure and optional expansion enclosure 17