Dell PowerStore 5000X EMC PowerStore Installation and Service Guide - Page 77
Install the M.2 boot module adaptor
View all Dell PowerStore 5000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Figure 96. Removing the M.2 boot module adaptor 4. Remove the internal M.2 boot modules: a. Gently pull the handle on the release tab to separate it from the tab holding it in place. b. Gently pull straight up on the pull tab to free it from the M.2 boot module adaptor. c. Remove the internal M.2 boot module from the M.2 boot module adaptor. Figure 97. Removing the internal M.2 boot modules from the M.2 boot module adaptor Install the M.2 boot module adaptor Steps 1. Place the internal M.2 boot modules that you removed from the faulted M.2 boot module adaptor into the new M.2 boot module adaptor. NOTE: The side of the internal M.2 boot module with the barcodes should be facing up. 2. Align the blue tab on the replacement internal M.2 boot module with the slot on the M.2 boot module adaptor and gently push it into place. 3. Connect the pull tab to the blue adapter. Base enclosure service procedures 77