Dell PowerStore 5000X EMC PowerStore Installation and Service Guide - Page 4

Add a new drive to the base enclosure...30 Removing the front bezel...30 Remove a drive filler module...30 Install a 2.5" drive...31 Verify the operation of a new part...32 Replace a power supply...32 Identify a faulted part from PowerStore Manager...33 Base enclosure power supply LEDs...33 Remove a power supply...33 Install a power supply...34 Verify the operation of a replacement part...35 Return a faulted part...35 Replace an embedded module...36 Identify a faulted part from PowerStore Manager...36 Embedded module LEDs...36 Power down the node...37 Remove a faulted embedded module...37 Transfer the 4-port card...39 Install an embedded module...40 Power up the node...41 Verify the operation of a replacement part...41 Return a faulted part...42 Replace a 4-port card...42 Identify a faulted part from PowerStore Manager...42 Embedded module LEDs...42 Power down the node...43 Remove an embedded module...43 Remove a 4-port card...44 Install a 4-port card...45 Install an embedded module...46 Power up the node...47 Verify the operation of a new part...47 Return a faulted part...48 Replace an SFP...48 Identify a faulted SFP module from PowerStore Manager 48 Remove an SFP module...48 Install an SFP module...49 Verify the operation of a replacement part...49 Return a faulted part...49 Replace an I/O module...50 Identify a faulted part from PowerStore Manager...50 Base enclosure I/O module LEDs...50 Power down the node...51 Remove a faulted I/O module...51 Install a new I/O module...51 Power up the node...52 Verify the operation of a replacement part...52 Return a faulted part...52 Replace a fan module...53 Identify a faulted part from PowerStore Manager...53 4 Contents