HP 1200 Service Manual - Page 103
Fuser assembly, If you need to realign the 69T gear, you must first remove the pressure
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Note Fuser assembly 1 Remove the left side, back, right side, and top covers (see pages 80 through 87). 2 Remove two screws (callout 1) from the right fuser plate. 3 Remove a third screw (callout 2) from behind the large gear on the right fuser plate. You can access the third screw through the holes in the 69Tgear. If you need to realign the 69T gear, you must first remove the pressure roller gear. Release the tab (callout 3) and remove the pressure roller gear from the printer. 4 Remove the bracket. 21 2 23 Figure 45. Removing the fuser assembly (1 of 4) EN Internal assemblies 101
EN
Internal assemblies
101
Fuser assembly
1
Remove the left side, back, right side, and top covers (see pages
80 through 87).
2
Remove two screws (callout 1) from the right fuser plate.
3
Remove a third screw (callout 2) from behind the large gear on
the right fuser plate.
Note
You can access the third screw through the holes in the 69Tgear.
If you need to realign the 69T gear, you must first remove the pressure
roller gear. Release the tab (callout 3) and remove the pressure roller
gear from the printer.
4
Remove the bracket.
Figure 45.
Removing the fuser assembly (1 of 4)
2
2
1
2
2
3