HP 1200 Service Manual - Page 83
Optional copier/scanner, copier/scanner in the back. Use care so that you do not bend or break
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
CAUTION Note Optional copier/scanner You must unplug the printer before removing or reinstalling the optional copier/scanner, or you might damage both the printer and the optional copier/scanner. 1 Remove the left side cover (see page 80). 2 Pull up on the ribbon cable to disconnect it from the connector (callout 1) on the formatter. The optional copier/scanner has two tabs that hook into the underside of the printer output bin. Another tab and a pin stabilize the optional copier/scanner in the back. Use care so that you do not bend or break the three tabs or the pin. 3 Pull the optional copier/scanner forward (callout 2), and lift it up (callout 3) to remove it. 2 23 21 Figure 25. Removing the optional copier/scanner EN Covers 81
EN
Covers
81
Optional copier/scanner
CAUTION
You must unplug the printer before removing or reinstalling the optional
copier/scanner, or you might damage both the printer and the optional
copier/scanner.
1
Remove the left side cover (see page 80).
2
Pull up on the ribbon cable to disconnect it from the connector
(callout 1) on the formatter.
Note
The optional copier/scanner has two tabs that hook into the underside
of the printer output bin. Another tab and a pin stabilize the optional
copier/scanner in the back. Use care so that you do not bend or break
the three tabs or the pin.
3
Pull the optional copier/scanner forward (callout 2), and lift it up
(callout 3) to remove it.
Figure 25.
Removing the optional copier/scanner
2
2
2
2
3
1