HP 1200 Service Manual - Page 108
Face-up roller, Reinstall note, Removing the output rollers 2 of 2
UPC - 637836445790
View all HP 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Face-up roller 1 Turn the fuser assembly over. 2 Remove the gear (callout 1) from the face-up roller and release the tab (callout 2) on the face-up roller bushing. 3 Rotate the face-up roller bushing forward until the pin releases. 4 Slide the face-up roller away from the gear side, and lift it out of the fuser assembly. 21 2 Figure 50. Removing the output rollers (2 of 2) Reinstall note Flex the face-up roller bushing to pop the pin back into place. 106 Chapter 5 - Removal and replacement EN
106
Chapter 5 - Removal and replacement
EN
Face-up roller
1
Turn the fuser assembly over.
2
Remove the gear (callout 1) from the face-up roller and release
the tab (callout 2) on the face-up roller bushing.
3
Rotate the face-up roller bushing forward until the pin releases.
4
Slide the face-up roller away from the gear side, and lift it out of
the fuser assembly.
Figure 50.
Removing the output rollers (2 of 2)
Reinstall note
Flex the face-up roller bushing to pop the pin back into place.
2
2
2
1