HP 3700 HP Color LaserJet 3550 and 3700 series - User Guide - Page 154

Designed For <prod&gt, Do Not Power Off - color laserjet disk initialize

Page 154 highlights

Control panel messages (continued) Control panel message Description Recommended action Event Log Empty SHOW EVENT LOG was selected from the control panel, and the event log is empty. No action necessary. FLASH DEVICE FAILURE alternates with Ready To clear press For the HP Color LaserJet 3700 series printer only. A device failure has occurred on the specified storage device. 1. Printing may continue for jobs that do not require the Flash DIMM. 2. To remove this message from the display, press . 3. If the message persists, remove and re-install the Flash DIMM. 4. If the message persists, replace the Flash DIMM. Flash disk X initializing alternates with DO NOT POWER OFF The new flash DIMM installed in slot X is initializing. For the HP Color LaserJet 3700 series printer only. No action necessary. FLASH FILE OPERATION FAILED alternates with Ready To clear press For the HP Color LaserJet 3700 series printer only. The printer received a PJL file system command that attempted to perform an illogical operation (for example, to download a file to a non-existent directory). 1. Printing may continue. 2. To remove this message from the display, press . 3. If the message reappears, there might be a problem with the software application. FLASH FILE SYSTEM IS FULL alternates with Ready To clear press For the HP Color LaserJet 3700 series printer only. The printer received a PJL file system command that attempted to store something on the file system but was unsuccessful because the file system is full. 1. Use HP Web Jetadmin software to delete files from the Flash Memory and try again. 2. To remove this message from the display, press . See HP Web Jetadmin for more information. FLASH IS WRITE PROTECTED alternates with Ready To clear press For the HP Color LaserJet 3700 series printer only. The file system is protected and no new files can be written to it. 1. To enable writing to the Flash Memory, turn off write protection using HP Web Jetadmin. 2. To remove this message from the display, turn the printer off and then back on. See HP Web Jetadmin for more information. Genuine HP supplies installed A new HP cartridge has been installed. The printer returns to the Ready state after approximately 10 seconds. No action necessary. GENUINE HP SUPPLIES DESIGNED FOR This genuine HP supply was not Replace this supply with a genuine HP designed for this printer and is not supply designed for this printer. supported. Print quality might be affected. Incorrect Access to the menu is restricted. Contact the network administrator. 142 Chapter 8 Problemsolving ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Control panel message
Description
Recommended action
Event Log Empty
SHOW EVENT LOG
was selected from
the control panel, and the event log is
empty.
No action necessary.
FLASH DEVICE
FAILURE
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
A device failure has occurred on the
specified storage device.
1.
Printing may continue for jobs that
do not require the Flash DIMM.
2.
To remove this message from the
display, press
.
3.
If the message persists, remove and
re-install the Flash DIMM.
4.
If the message persists, replace the
Flash DIMM.
Flash disk X
initializing
alternates with
DO NOT POWER OFF
The new flash DIMM installed in slot X is
initializing.
For the HP Color LaserJet 3700 series
printer only.
No action necessary.
FLASH FILE
OPERATION FAILED
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to
download a file to a non-existent
directory).
1.
Printing may continue.
2.
To remove this message from the
display, press
.
3.
If the message reappears, there
might be a problem with the
software application.
FLASH FILE
SYSTEM IS FULL
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
The printer received a PJL file system
command that attempted to store
something on the file system but was
unsuccessful because the file system is
full.
1.
Use HP Web Jetadmin software to
delete files from the Flash Memory
and try again.
2.
To remove this message from the
display, press
.
See
HP Web
Jetadmin
for more
information.
FLASH IS
WRITE PROTECTED
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
The file system is protected and no new
files can be written to it.
1.
To enable writing to the Flash
Memory, turn off write protection
using HP Web Jetadmin.
2.
To remove this message from the
display, turn the printer off and then
back on.
See
HP Web
Jetadmin
for more
information.
Genuine HP
supplies installed
A new HP cartridge has been installed.
The printer returns to the
Ready
state
after approximately 10 seconds.
No action necessary.
GENUINE HP SUPPLIES
DESIGNED FOR <PROD>
This genuine HP supply was not
designed for this printer and is not
supported. Print quality might be affected.
Replace this supply with a genuine HP
supply designed for this printer.
Incorrect
Access to the menu is restricted.
Contact the network administrator.
Control panel messages (continued)
142
Chapter 8
Problemsolving
ENWW