HP 450c HP DesignJet 430, 450C, and 455CA Printer - User's Guide - Page 107
Test Print again.
View all HP 450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
INTERNAL 5 PRINTS Special internal prints Using the Print Quality Test Print Correct Incorrect If the line is not perfectly straight at bias 0 in the test image (see figure above), try the following: 1 Perform the Accuracy Calibration (see page 6-11) and print the Print Quality Test Print again to see if there has been any improvement. 2 If the error is still present, replace the failing cartridge and print the Print Quality Test Print again. Test 4 (Color Alignment Quality) is in two parts: The first of the patterns (in the upper line) tests alignment between the cyan and magenta cartridges; it should be blue with no cyan or magenta shadows. The second tests alignment between the cyan and yellow cartridges; it should be green with no cyan or yellow shadows. The third tests alignment between the magenta and yellow cartridges; it should be red, with no magenta or yellow shadows. 5-15