HP 450c HP DesignJet 430, 450C, and 455CA Printer - User's Guide - Page 59
the roll-feed assembly while pulling the roll with your fingers to be able to release
View all HP 450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
MEDIA 2 Working with media Loading roll media 3 Remove the old roll by pulling firmly first on the left end of the spindle and then on the right. You may find that you have to push your thumbs against the cover of the roll-feed assembly while pulling the roll with your fingers to be able to release the spindle. If the new roll is on a different spindle, then you can skip steps 4 and 5, and go straight to step 6. 4 Remove the left media stop, and then remove the roll from the spindle, with the right media stop still connected to the spindle. 1 2 2-17
2–17
3
Remove the
old roll
by pulling firmly first on the left end of the spindle and then
on the right.
You may find that you have to push your thumbs against the cover of
the roll-feed assembly while pulling the roll with your fingers to be able to release
the spindle.
If the new roll is on a different spindle, then you can skip steps 4 and 5, and go
straight to step 6.
4
Remove the left media stop, and then remove the roll from the spindle, with the
right media stop still connected to the spindle.
1
2
Working with media
Loading roll media
MEDIA
2