Home » HP Manuals » Motherboards » HP A4500A » Manual Viewer

HP A4500A Hardware Manual - rp24xx, Customer Viewable - Page 167

Step 5., IO Timeout Seconds

Add to My Manuals
Save this manual to your list of manuals

Page 167 highlights

HotPlug Disk Drive Removal (HPUX Systems Only) read/write LV Status available/syncd Mirror copies 1 Consistency Recovery MWC Schedule parallel LV Size (Mbytes) 256 Current LE 64 Allocated PE 128 Stripes 0 Stripe Size (Kbytes) 0 Bad block off Allocation strict/contiguous IO Timeout (Seconds) default --- Distribution of logical volume ---PV Name LE on PV PE on PV /dev/dsk/c1t6d0 64 64 /dev/dsk/c2t6d0 64 64 --- Logical extents ---LE PV1 PE1 Status 1 PV2 PE2 Status 2 00000 /dev/dsk/c1t6d0 00000 current /dev/dsk/c2t6d0 00000 current 00001 /dev/dsk/c1t6d0 00001 current /dev/dsk/c2t6d0 00001 current 00002 /dev/dsk/c1t6d0 00002 current /dev/dsk/c2t6d0 00002 current 00003 /dev/dsk/c1t6d0 00003 current /dev/dsk/c2t6d0 00003 current 00004 /dev/dsk/c1t6d0 00004 current /dev/dsk/c2t6d0 00004 current 00005 /dev/dsk/c1t6d0 00005 current /dev/dsk/c2t6d0 00005 current 00006 /dev/dsk/c1t6d0 00006 current /dev/dsk/c2t6d0 00006 current 00007 /dev/dsk/c1t6d0 00007 current /dev/dsk/c2t6d0 00007 current 00008 /dev/dsk/c1t6d0 00008 current /dev/dsk/c2t6d0 00008 current The pvkey (0 or 1 in this example) shown in the first command maps to the device file names (/dev/dsk/c1t6d0 or /dev/dsk/c2t6d0) in the second command under columns PV1 and PV2, respectively. Step 5. Reduce any logical volumes that have mirror copies on the faulty disk drive so that they no longer mirror onto that disk drive (note the -A n option): # lvreduce -m 0 -A n -k /dev/dsk/cXtXcX & (for one-way mirroring) OR # lvreduce -m 1 -A n -k /dev/dsk/cXtXcX & (for two-way mirroring). For example: # lvreduce -m 0 -A n -k /dev/vg00/lvol4 /dev/dsk/c2t4d0 1& The following message will appear: Logical volume /dev/vg00/lvol4 has been successfully reduced. lvlnboot: Logical Volume has no extents It is important to include the ampersand (&) at the end of the command line. This lvreduce process will hang, and you will need terminal control to kill the command. Once the "successfully reduced" message has been generated, manually kill the process, using the kill -9 command. a. Use the ps command to find the PID for the lvreduce process. # ps -ef | grep lvreduce b. Stop the process. (This may take several minutes before the process finally ends. # kill -9 Step 6. Repeat steps 4 and 5 for all logical volumes. Step 7. With all logical volumes reduced, now reduce the volume group using the vgreduce command. For example: # vgreduce /dev/vg00 /dev/dsk/c2t6d0 Chapter 239

Section	Page
rp24xx Hardware Manual	1
What’s New, and Using This Information	3
Using rp24xx Server Information	5
What’s New?	7
New Sections:	7
Modified Sections:	7
System Hardware Overview and Reference Information	9
System Overview	11
Hardware Overview	11
Software Requirements	11
rp24xx Block Diagram	13
hp Server rp24xx Safety and Regulatory Information	15
Overview	15
Product Information	15
Regulatory Information	16
Electrical Safety	16
Cabinet Safety Precautions	17
Sicherheitsvorkehrungen für Einbaugehäuse	18
Consignes de sécurité relatives aux armoires	19
Medidas de seguridad para armarios	19
Procedimentos de Segurança - Armários	21
Precauzioni di siccurezza sugli armadi	22
Säkerhetsföreskrifter för kabinett	23
Voorzorgsmaatregelen voor de veiligheid voor kasten	24
Sikkerhedsforanstaltninger for skabe	25
Sikkerhetsforanstaltninger for skapene	26
Laitekaappia koskeva turvavaroitus	27
Declaration of Conformity	33
FCC Statement (USA Only)	34
Canada RFI Statement	34
Notice relative aux interférences radioélectriques (Canada)	34
European Union RFI Statement	34
Korean RFI Statement	35
Taiwan RFI Statement	35
Japan Safety and Regulatory Statements	35
Acoustics (Germany)	36
Geräuschemission (Deuschland)	36
Australian C-Tick Label	36
Laser Safety	36
ESD Safety Standards	37
Effect of humidity on ESD charge levels	37
Static protection measures — computer room environments	37
Static protection measures — office environments	37
Acoustic Safety Standards	39
Reducing Acoustic Noise Levels	39
Local Computer Installation Codes	41
Altitude Operation Standards	43
Effects of Altitude	43
Temperature and Humidity Operation Standards	45
Electrical Interference Safety Standards	47
Convenience Wall Outlets	47
Lightning	47
Other Safety/Operation Standards	49
Vibration	49
Flammable Materials	49
Airborne Contaminants	49
Electrostatic Discharge	49
System Site Preparation	51
Cooling Requirements	53
Input Power Requirements	55
Stand Alone Server Power Requirements	55
Cabinet Mounted Server Power Requirements	55
Racked Server Site Requirements	57
HP Cabinet Dimensions	57
Cabinet Minimum Service Access Requirements	58
Non-HP Cabinet Installation Requirements	58
Stacked Server Site Requirements	59
Server Dimensions	59
Stacked Server Minimum Service Access Requirements	60
Stand-Alone Server Site Requirements	61
Server Dimensions	61
Stand-Alone Server Minimum Service Access Requirements	61
Temperature and Humidity Operation Standards	63
Server Unpack and Install Instructions	65
Unpack the Server	67
Overview	67
Open and Unload the Carton	67
Unpack the Server	67
Attaching the Pedestal Base	68
Open the Accessory Kit	69
Open the Installation Instructions and Regulatory Information Packet	69
Third Party Software	69
Server External Connections	71
Connect External Small Computer System Interface (SCSI) Devices	71
Connect a System Console	72
Connect the Core Local Area Network (LAN)	72
Connect Power Cords	72
Installing a Stand-alone Server in a Cabinet	73
Installing a Stand-alone Server in an HP Cabinet	73
Cabinet Identification	73
Cabinet Loading Requirements	73
Installing the Server	73
Installing Bezel End Caps	74
Installation In Third-Party Racks	76
Server Slide Rail Installation	81
Cabinet Installation	89
Cabinet Mounted Server Unpack	91
Overview	91
Installing a Factory-integrated Cabinet	91
PowerTrust Uninterruptible Power Supply (UPS) Option	95
Repackaging the Cabinet for Shipment	97
Stacking Servers	99
Unstacking Servers	101
Operating Instructions	103
Configuring the Guardian Service Processor (GSP)	105
Configuring the GSP LAN Port	105
Adding Users	105
Removing Users	107
Changing the Default GSP Configuration	107
Initial Power-up	109
Boot To Operating System	111
System Power Down	113
Adding Components to the Server	115
Add Memory	117
Memory Configuration Rules	117
Add Peripheral Component Interconnect (PCI) Cards	119
New I/O Cards For rp24xx	120
Add Disks	123
Adding CPUs and Socket Cleaning	125
Tools Required	125
Cleaning Kit Components	125
CPU Cleaning for System Board Replacement	127
Installing the CPU	128
System Console Configuration	131
C1099A VT-100 Mode Configuration.	131
HP700 VT-100 Mode Configuration	131
LAN Console	133
Secure Web Console I/O Card Replacement	135
Secure Web Console Features	135
Secure Web Console System Information	143
Troubleshooting the Server	145
Chassis Code to Customer Replaceable Unit (CRU) Decode	147
Accessing Error Chassis Logs	147
Key CRU Identification Fields for Error Chassis Logs	147
Cross-Referencing Chassis Log Errors to A400/A500 CRU’s	147
Server Component Removal and Replacement Procedures	151
Customer Replaceable Unit (CRU) Physical Location	153
Customer Replaceable Unit (CRU) Part Numbers	155
Front Bezel Removal	157
Front Bezel Replacement	159
Server Cover Removal	161
Server Cover Replacement	163
HotPlug Disk Drive Removal (HPUX Systems Only)	165
HotPlug Software Procedure	165
HotPlug Hardware Procedure	168
HP-UX HotPlug Disk Drive Replacement	171
HotPlug Hardware Procedure	171
HP-UX HotPlug Software Procedure	172
HP-UX HotPlug Procedure for Unattached Physical Volumes	173
I/O Card Cage Removal	175
I/O Card Cage Replacement	177
PCI I/O Card Removal	179
PCI I/O Card Replacement	181
PCI Backplane Removal	183
PCI Backplane Replacement	185
DC-DC Converter Removal	187
DC-DC Converter Replacement	189
Memory DIMM Removal	191
Memory DIMM Replacement	193
Guardian Service Processor (GSP) Removal	195
Guardian Service Processor Replacement	197
Extend a Server From the Rack	199

Match case Limit results 1 per page

Chapter

HotPlug Disk Drive Removal (HPUX Systems Only)

239

read/write

LV Status

available/syncd

Mirror

copies

Consistency Recovery

MWC

Schedule

parallel

LV Size (Mbytes)

256

Current LE

Allocated PE

128

Stripes

Stripe Size (Kbytes)

Bad block

off

Allocation

strict/contiguous

IO Timeout (Seconds)

default

---

Distribution of logical volume ---PV Name

LE on PV

PE on PV

/dev/dsk/c1t6d0

/dev/dsk/c2t6d0

--- Logical extents ---LE

PV1

PE1

Status 1 PV2

PE2

Status 2 00000 /dev/dsk/c1t6d0

00000 current

/dev/dsk/c2t6d0

00000 current

00001 /dev/dsk/c1t6d0

00001 current

/dev/dsk/c2t6d0

00001 current

00002 /dev/dsk/c1t6d0

00002 current

/dev/dsk/c2t6d0

00002 current

00003 /dev/dsk/c1t6d0

00003 current

/dev/dsk/c2t6d0

00003 current

00004 /dev/dsk/c1t6d0

00004 current

/dev/dsk/c2t6d0

00004 current

00005 /dev/dsk/c1t6d0

00005 current

/dev/dsk/c2t6d0

00005 current

00006 /dev/dsk/c1t6d0

00006 current

/dev/dsk/c2t6d0

00006 current

00007 /dev/dsk/c1t6d0

00007 current

/dev/dsk/c2t6d0

00007 current

00008 /dev/dsk/c1t6d0

00008 current

/dev/dsk/c2t6d0

00008 current

The p

vkey

(0 or 1 in this example) shown in the first command maps to the device file names

(/dev/dsk/c1t6d0 or /dev/dsk/c2t6d0) in the second command under columns PV1 and PV2,

respectively.

Step 5.

Reduce any logical volumes that have mirror copies on the faulty disk drive so that they no longer

mirror onto that disk drive (note the

-A n

option):

# lvreduce -m 0 -A n -k <LV name> /dev/dsk/cXtXcX <pvkey#>&

(for one-way mirroring)

# lvreduce -m 1 -A n -k <LV name> /dev/dsk/cXtXcX <pvkey#>&

(for two-way mirroring).

For example:

# lvreduce -m 0 -A n -k /dev/vg00/lvol4 /dev/dsk/c2t4d0 1&

The following message will appear:

Logical volume /dev/vg00/lvol4 has been successfully reduced.

lvlnboot: Logical Volume has no extents

It is important to include the ampersand (&) at the end of the command line. This

lvreduce

process

will hang, and you will need terminal control to kill the command. Once the "successfully reduced"

message has been generated, manually kill the process, using the kill -9 command.

Use the

command to find the PID for the

lvreduce

process.

# ps -ef | grep lvreduce

Stop the process. (This may take several minutes before the process finally ends.

# kill -9 <PID>

Step 6.

Repeat steps 4 and 5 for all logical volumes.

Step 7.

With all logical volumes reduced, now reduce the volume group using the

vgreduce

command. For

example:

# vgreduce /dev/vg00 /dev/dsk/c2t6d0