HP A4500A Hardware Manual - rp24xx, Customer Viewable - Page 179
PCI I/O Card Removal, To remove PCI I/O cards 2
View all HP A4500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
PCI I/O Card Removal PCI I/O Card Removal PCI slots 2, 3, and 4 are located in the I/O Card Cage, which must be taken out of the chassis prior to removing these cards. PCI slot 1 supports a short PCI I/O card attached to the I/O Backplane and is located outside of the card cage If a Secure Web Console card was ordered as part of the system, it may be located in this slot and must be removed before taking the I/O Card Cage out of the chassis. CAUTION Ensure that the system is shut down and power removed from the server before attempting removal or replacement of a component. Always use an antistatic wrist strap and mat when working on the server. Remove PCI I/O cards as follows: • To remove PCI I/O card 1: a. Remove the screw that fastens the connector to the inside bulkhead. b. Pull the I/O card out of its slot on the outside I/O Backplane. NOTE If you are removing the Secure Web Console card in the slot 1 position, ensure that the 5v power plug is removed from the power outlet (located on the Guardian Service Processor (GSP), front right side). • To remove PCI I/O cards 2, 3, and 4: a. Take the I/O card cage out of the server. b. Grasp the edge of the I/O card and pull it out of its slot in the card cage. The following graphic shows an exploded view of the I/O card cage with I/O cards. Chapter 251