HP A4500A Hardware Manual - rp24xx, Customer Viewable - Page 191
Memory DIMM Removal
View all HP A4500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Memory DIMM Removal Memory DIMM Removal Memory DIMMs reside in eight sockets (two sets of four sockets each) located on the right side of the System Board. They are normally loaded in DIMM pairs of equal size. CAUTION Ensure that the system is shut down and power removed from the server before attempting removal or replacement of a component. To remove a memory DIMM, perform the following steps: Step 1. Press down on the extractor levers on each end of the selected memory DIMM to unseat the DIMM from its socket. Step 2. When the DIMM is unseated, pull it up and out of the System Board. The following picture shows a memory DIMM located on the right side (from the server front) of the server system board. The next graphic is a drawing of a generic memory DIMM, followed by drawings that show DIMM removal/replacement. Chapter 275